I am trying to add a trigger event so I can average with N=1 in order to fake out mne_analyze to view my epoch as an average.
Here is my text file for the trigger:
0 0 0 0 psuedo_event
10 0.009 0 1 trigger1
Here is my text file to the averaging:
average {
outfile A1_ec1_bcm_epc1-ave.fif
eventfile A1_triggers.txt
logfile A1_ave_log.txt
category {
event 1
}
}
Here is my result ? note the syntax error at the end ? what is wrong with my text file?
Thanks,
-Jeff
kje-macbook:MNE jefferiksen$ mne_process_raw --raw A1_ec1_bcm_epc1.fif --filteroff --events A1_triggers.txt --ave A1_ave.txt --projoff
mne_process_raw version 2.34 compiled at Jan 7 2011 02:27:27
32-bit architecture. Using 1000.00 Mbytes for ring buffers
--- Setting up the filter ---
Using a 4096-point FFT in filtering of raw data with 2048-sample tapers
bandpass = 0.0 ( 0.0) ... 40.0 ( 5.0) Hz
filter is off
--- Opening A1_ec1_bcm_epc1.fif ---
No compensation data in A1_ec1_bcm_epc1.fif
Compensation in file : uncompensated
Setting up compensation data...
No compensation set. Nothing more to do.
No compensation was requested.
A new compensation value (uncompensated) was assigned to 0 MEG channels.
No SSS data in A1_ec1_bcm_epc1.fif
0 bad channels read from A1_ec1_bcm_epc1.fif
NOTE: Filter is presently switched off.
NOTE: Filter is presently switched off.
Initial dc offsets determined
Raw data file A1_ec1_bcm_epc1.fif:
nchan = 257
nsamp = 900
sfreq = 1000.000 Hz
length = 0.900 sec
0 events found in A1_ec1_bcm_epc1-eve.fif
Trigger channel : STI 014 max_event : 0
No projection operator found in A1_ec1_bcm_epc1.fif
Average EEG reference projection added.
Projections turned off.
--- Projection status ---
# 1 : Average EEG reference : 1 vecs : 257 chs EEG idle
--- Averaging according to A1_ave.txt ---
Was expecting a {
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.nmr.mgh.harvard.edu/pipermail/mne_analysis/attachments/20120423/f6281850/attachment.html