# EEG reference

**URL:** <https://mne.discourse.group/t/eeg-reference/1318>\
**Category:** Mailing List Archive (read-only)\
**Tags:** list-archive\
**Created:** [September 23, 2017, 11:28pm UTC](https://mne.discourse.group/t/eeg-reference/1318 "2017-09-23T23:28:42Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/mne/original/1X/85cc6bd2b69cb698a166dc6d880fb550510d0144.jpeg) [@system](https://mne.discourse.group/u/system)\
**Post date:** [September 23, 2017, 11:28pm UTC](https://mne.discourse.group/t/eeg-reference/1318/1 "2017-09-23T23:28:42Z")

</div>

Hello MNE users,

I noticed that in MNE inverse operations, all EEG data were forced by an  
average referencing.  
Does anyone has insight about how does the average reference influence the  
inverse operations in MNE (I mean use dSPM or sLoreta)? Especially would  
this average referencing influence functional connectivity measure in  
source space (e.g. using phase locking)?

Thanks,  
Mengting  
-------------- next part --------------  
An HTML attachment was scrubbed...  
URL: [http://mail.nmr.mgh.harvard.edu/pipermail/mne\_analysis/attachments/20170923/d04881a0/attachment-0001.html](http://mail.nmr.mgh.harvard.edu/pipermail/mne_analysis/attachments/20170923/d04881a0/attachment-0001.html)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/mne/original/1X/85cc6bd2b69cb698a166dc6d880fb550510d0144.jpeg) [@system](https://mne.discourse.group/u/system)\
**Post date:** [September 25, 2017, 8:55am UTC](https://mne.discourse.group/t/eeg-reference/1318/2 "2017-09-25T08:55:48Z")

</div>

Hi Mengting,

The average reference is the only valid scheme when performing ?source localisation?, no matter what you do afterwards. To first order, the localisation procedure is

- have measured (EEG) data  
- build forward model that computes sensor-level readings for know sources  
- compare measured and predicted (forward-projected) data to each other  
- minimise prediction error under chosen prior/model

The predicted data are calculated relative to a hypothetical absolute reference potential of zero at infinity, whereas a real dataset could be referenced to a number of points on the head. To be able to compare the two datasets, both are re-referenced to their respective average: the average reference does not depend on the location of the on-line reference electrode (as long as it was functioning properly). After this re-scaling, the values can be compared directly.

Note that like any (proper) re-referencing procedure, taking the common average only shifts the zero-point; relative differences between electrode readings remain unaltered.

/Chris

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/mne/original/1X/85cc6bd2b69cb698a166dc6d880fb550510d0144.jpeg) [@system](https://mne.discourse.group/u/system)\
**Post date:** [September 27, 2017, 6:54pm UTC](https://mne.discourse.group/t/eeg-reference/1318/3 "2017-09-27T18:54:03Z")

</div>

Hi Chris,

Thanks for the info, this really helps in understanding the whole  
procedures. So as I understand, reference is only a required step for  
source localization, but not any other steps like measuring the  
connectivity between brain regions. Sounds reference removed the DC  
componets but remains the oscillation. If so, does it influence the power  
in DC components? Also, does it matter the conventional source localization  
methods such as dipole fitting?

Really appreciate for help,

Mengting

2017-09-25 4:55 GMT-04:00 Christopher Bailey \<cjb at cfin.au.dk\>:

> Hi Mengting,
> 
> The average reference is the only valid scheme when performing ?source  
> localisation?, no matter what you do afterwards. To first order, the  
> localisation procedure is
> 
> - have measured (EEG) data  
> - build forward model that computes sensor-level readings for know sources  
> - compare measured and predicted (forward-projected) data to each other  
> - minimise prediction error under chosen prior/model
> 
> The predicted data are calculated relative to a hypothetical absolute  
> reference potential of zero at infinity, whereas a real dataset could be  
> referenced to a number of points on the head. To be able to compare the two  
> datasets, both are re-referenced to their respective average: the average  
> reference \*does not depend on the location of the on-line reference  
> electrode\* (as long as it was functioning properly). After this  
> re-scaling, the values can be compared directly.
> 
> Note that like any (proper) re-referencing procedure, taking the common  
> average only shifts the zero-point; relative differences between electrode  
> readings remain unaltered.
> 
> /Chris
> 
> Hello MNE users,
> 
> I noticed that in MNE inverse operations, all EEG data were forced by an  
> average referencing.  
> Does anyone has insight about how does the average reference influence the  
> inverse operations in MNE (I mean use dSPM or sLoreta)? Especially would  
> this average referencing influence functional connectivity measure in  
> source space (e.g. using phase locking)?
> 
> Thanks,  
> Mengting  
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> Mne\_analysis mailing list  
> Mne\_analysis at nmr.mgh.harvard.edu  
> [https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne\_analysis](https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne_analysis)
> 
> The information in this e-mail is intended only for the person to whom it  
> is  
> addressed. If you believe this e-mail was sent to you in error and the  
> e-mail  
> contains patient information, please contact the Partners Compliance  
> HelpLine at  
> [http://www.partners.org/complianceline](http://www.partners.org/complianceline) . If the e-mail was sent to you in  
> error  
> but does not contain patient information, please contact the sender and  
> properly  
> dispose of the e-mail.
> 
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> Mne\_analysis mailing list  
> Mne\_analysis at nmr.mgh.harvard.edu  
> [https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne\_analysis](https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne_analysis)
> 
> The information in this e-mail is intended only for the person to whom it  
> is  
> addressed. If you believe this e-mail was sent to you in error and the  
> e-mail  
> contains patient information, please contact the Partners Compliance  
> HelpLine at  
> [http://www.partners.org/complianceline](http://www.partners.org/complianceline) . If the e-mail was sent to you in  
> error  
> but does not contain patient information, please contact the sender and  
> properly  
> dispose of the e-mail.

-------------- next part --------------  
An HTML attachment was scrubbed...  
URL: [http://mail.nmr.mgh.harvard.edu/pipermail/mne\_analysis/attachments/20170927/1ef78c7c/attachment-0001.html](http://mail.nmr.mgh.harvard.edu/pipermail/mne_analysis/attachments/20170927/1ef78c7c/attachment-0001.html)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/mne/original/1X/85cc6bd2b69cb698a166dc6d880fb550510d0144.jpeg) [@system](https://mne.discourse.group/u/system)\
**Post date:** [September 28, 2017, 6:58am UTC](https://mne.discourse.group/t/eeg-reference/1318/4 "2017-09-28T06:58:11Z")

</div>

Hi Mengting,

So as I understand, reference is only a required step for source localization,

The \_average\_ reference is required for source localisation

but not any other steps like measuring the connectivity between brain regions.

I?m not sure I understand what you mean by ?brain regions? here. If you?re going to measure connectivity in source space, your need an (inverse) operator of some sort to project your electrode-data ?into the brain?.

If you want to do sensor-level connectivity calculations on EEG data, the effect of the reference might depend on the connectivity metric you use. For those time/frequency-domain measures I?m aware of (but have little first-hand experience with), it doesn?t matter which reference your data is in.

Sounds reference removed the DC componets but remains the oscillation. If so, does it influence the power in DC components?

Yes and no. Relative differences within and between channels remain the same in any (proper) reference. Note though that the time-domain is not involved in (re-)referencing, so possible ?DC components? still remain in the data.

Also, does it matter the conventional source localization methods such as dipole fitting?

All localisation methods require the average reference, otherwise the recorded and predicted (forward model) data cannot be compared.

Best,

Chris

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/mne/original/1X/85cc6bd2b69cb698a166dc6d880fb550510d0144.jpeg) [@system](https://mne.discourse.group/u/system)\
**Post date:** [September 28, 2017, 7:54am UTC](https://mne.discourse.group/t/eeg-reference/1318/5 "2017-09-28T07:54:16Z")

</div>

Hi Mengting,

let me chime in here. Whenever you are doing EEG analysis, the choice of  
reference is important. EEG measures voltage, which is the difference in  
electric potential between two points. This means, there's technically  
no such thing as "the voltage at electrode Cz", there is only "the  
difference in electric potential between electrodes Cz and the one I  
stuck on the nose" (or whatever reference electrode you used, could be CMS).

After the recording, it is easy to "re-reference" the data, which is  
choosing a difference electrode as a reference. For example, to move  
from the nose reference to channel Pz as reference, you can just do: Cz  
= Cz - Pz and you have a voltage at the Cz channel with Pz as reference.

You can imagine your data often looks completely different, depending on  
the reference you choose. If you choose Pz as a reference, the signal at  
Pz will be 0 (Pz - Pz) and all channels surrounding Pz only have a very  
small signal. If Pz contained oscillatory activity (maybe alpha  
rhythms), you would see alpha power at every electrode \*except\*  
surrounding Pz. For example you would see "negative" alpha at Fpz  
(remember, we're looking at Fpz - Pz).

So maybe Pz is not a very useful reference. We would like to have some  
"neutral" reference that doesn't contain signals of interest. This is  
why nose and mastoids are popular locations for the reference. But  
there's another option: choose the average of all electrodes as "virtual  
reference". With this reference, at any time, mean(Cz, Pz, ...) = 0.  
This is the reference assumed by forward models, which is why when doing  
anything that involves the forward model (source localization,  
connectivity analysis at the source level, etc.) your data needs to be  
in this reference.

One thing you need to be aware of when re-reference to an average  
reference is that the reference is, you know, the average of all  
electrodes. If one of the electrodes is noisy (maybe it got loose during  
the experiment), this ruins the reference signal, and since the  
reference is subtracted from all sensors, it ruins the signal at \*all\*  
sensors.

So, first use a sensors which you know for sure has a good signal as a  
reference (preferably a "neutral" reference like the noise, mastoids or  
earlobe), then inspect the data to spot all sensors that have problems.  
Either remove them from the data or have MNE-Python reconstruct the  
signal at the bad sensor by interpolating the neighbouring sensors.  
Then, when the data is squeaky clean, move to the average reference.

regards,  
Marijn.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/mne/original/1X/85cc6bd2b69cb698a166dc6d880fb550510d0144.jpeg) [@system](https://mne.discourse.group/u/system)\
**Post date:** [October 2, 2017, 1:24am UTC](https://mne.discourse.group/t/eeg-reference/1318/6 "2017-10-02T01:24:28Z")

</div>

Hey Marijn,

Many thanks for this very basic but really important message, I think it  
makes me feel much better why select average reference.  
Thanks,

Mengting

2017-09-28 3:54 GMT-04:00 Marijn van Vliet \<w.m.vanvliet at gmail.com\>:

> Hi Mengting,
> 
> let me chime in here. Whenever you are doing EEG analysis, the choice of  
> reference is important. EEG measures voltage, which is the difference in  
> electric potential between two points. This means, there's technically no  
> such thing as "the voltage at electrode Cz", there is only "the difference  
> in electric potential between electrodes Cz and the one I stuck on the  
> nose" (or whatever reference electrode you used, could be CMS).
> 
> After the recording, it is easy to "re-reference" the data, which is  
> choosing a difference electrode as a reference. For example, to move from  
> the nose reference to channel Pz as reference, you can just do: Cz = Cz -  
> Pz and you have a voltage at the Cz channel with Pz as reference.
> 
> You can imagine your data often looks completely different, depending on  
> the reference you choose. If you choose Pz as a reference, the signal at Pz  
> will be 0 (Pz - Pz) and all channels surrounding Pz only have a very small  
> signal. If Pz contained oscillatory activity (maybe alpha rhythms), you  
> would see alpha power at every electrode \*except\* surrounding Pz. For  
> example you would see "negative" alpha at Fpz (remember, we're looking at  
> Fpz - Pz).
> 
> So maybe Pz is not a very useful reference. We would like to have some  
> "neutral" reference that doesn't contain signals of interest. This is why  
> nose and mastoids are popular locations for the reference. But there's  
> another option: choose the average of all electrodes as "virtual  
> reference". With this reference, at any time, mean(Cz, Pz, ...) = 0. This  
> is the reference assumed by forward models, which is why when doing  
> anything that involves the forward model (source localization, connectivity  
> analysis at the source level, etc.) your data needs to be in this reference.
> 
> One thing you need to be aware of when re-reference to an average  
> reference is that the reference is, you know, the average of all  
> electrodes. If one of the electrodes is noisy (maybe it got loose during  
> the experiment), this ruins the reference signal, and since the reference  
> is subtracted from all sensors, it ruins the signal at \*all\* sensors.
> 
> So, first use a sensors which you know for sure has a good signal as a  
> reference (preferably a "neutral" reference like the noise, mastoids or  
> earlobe), then inspect the data to spot all sensors that have problems.  
> Either remove them from the data or have MNE-Python reconstruct the signal  
> at the bad sensor by interpolating the neighbouring sensors. Then, when the  
> data is squeaky clean, move to the average reference.
> 
> regards,  
> Marijn.
> 
> Hi Mengting,
> 
> So as I understand, reference is only a required step for source  
> localization,
> 
> The \_average\_ reference is required for source localisation
> 
> but not any other steps like measuring the connectivity between brain  
> regions.
> 
> I?m not sure I understand what you mean by ?brain regions? here. If you?re  
> going to measure connectivity in source space, your need an (inverse)  
> operator of some sort to project your electrode-data ?into the brain?.
> 
> If you want to do sensor-level connectivity calculations on EEG data, the  
> effect of the reference might depend on the connectivity metric you use.  
> For those time/frequency-domain measures I?m aware of (but have little  
> first-hand experience with), it doesn?t matter which reference your data is  
> in.
> 
> Sounds reference removed the DC componets but remains the oscillation. If  
> so, does it influence the power in DC components?
> 
> Yes and no. Relative differences within and between channels remain the  
> same in any (proper) reference. Note though that the time-domain is not  
> involved in (re-)referencing, so possible ?DC components? still remain in  
> the data.
> 
> Also, does it matter the conventional source localization methods such as  
> dipole fitting?
> 
> All localisation methods require the average reference, otherwise the  
> recorded and predicted (forward model) data cannot be compared.
> 
> Best,
> 
> Chris
> 
> Hi Chris,
> 
> Thanks for the info, this really helps in understanding the whole  
> procedures. So as I understand, reference is only a required step for  
> source localization, but not any other steps like measuring the  
> connectivity between brain regions. Sounds reference removed the DC  
> componets but remains the oscillation. If so, does it influence the power  
> in DC components? Also, does it matter the conventional source localization  
> methods such as dipole fitting?
> 
> Really appreciate for help,
> 
> Mengting
> 
> 2017-09-25 4:55 GMT-04:00 Christopher Bailey \<cjb at cfin.au.dk\>:
> 
> > Hi Mengting,
> > 
> > The average reference is the only valid scheme when performing ?source  
> > localisation?, no matter what you do afterwards. To first order, the  
> > localisation procedure is
> > 
> > - have measured (EEG) data  
> > - build forward model that computes sensor-level readings for know sources  
> > - compare measured and predicted (forward-projected) data to each other  
> > - minimise prediction error under chosen prior/model
> > 
> > The predicted data are calculated relative to a hypothetical absolute  
> > reference potential of zero at infinity, whereas a real dataset could be  
> > referenced to a number of points on the head. To be able to compare the two  
> > datasets, both are re-referenced to their respective average: the average  
> > reference \*does not depend on the location of the on-line reference  
> > electrode\* (as long as it was functioning properly). After this  
> > re-scaling, the values can be compared directly.
> > 
> > Note that like any (proper) re-referencing procedure, taking the common  
> > average only shifts the zero-point; relative differences between electrode  
> > readings remain unaltered.
> > 
> > /Chris
> > 
> > Hello MNE users,
> > 
> > I noticed that in MNE inverse operations, all EEG data were forced by an  
> > average referencing.  
> > Does anyone has insight about how does the average reference influence  
> > the inverse operations in MNE (I mean use dSPM or sLoreta)? Especially  
> > would this average referencing influence functional connectivity measure in  
> > source space (e.g. using phase locking)?
> > 
> > Thanks,  
> > Mengting  
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > Mne\_analysis mailing list  
> > Mne\_analysis at nmr.mgh.harvard.edu  
> > [https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne\_analysis](https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne_analysis)
> > 
> > The information in this e-mail is intended only for the person to whom it  
> > is  
> > addressed. If you believe this e-mail was sent to you in error and the  
> > e-mail  
> > contains patient information, please contact the Partners Compliance  
> > HelpLine at  
> > [http://www.partners.org/complianceline](http://www.partners.org/complianceline) . If the e-mail was sent to you  
> > in error  
> > but does not contain patient information, please contact the sender and  
> > properly  
> > dispose of the e-mail.
> > 
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > Mne\_analysis mailing list  
> > Mne\_analysis at nmr.mgh.harvard.edu  
> > [https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne\_analysis](https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne_analysis)
> > 
> > The information in this e-mail is intended only for the person to whom it  
> > is  
> > addressed. If you believe this e-mail was sent to you in error and the  
> > e-mail  
> > contains patient information, please contact the Partners Compliance  
> > HelpLine at  
> > [http://www.partners.org/complianceline](http://www.partners.org/complianceline) . If the e-mail was sent to you  
> > in error  
> > but does not contain patient information, please contact the sender and  
> > properly  
> > dispose of the e-mail.
> 
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> Mne\_analysis mailing list  
> Mne\_analysis at nmr.mgh.harvard.edu  
> [https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne\_analysis](https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne_analysis)
> 
> The information in this e-mail is intended only for the person to whom it  
> is  
> addressed. If you believe this e-mail was sent to you in error and the  
> e-mail  
> contains patient information, please contact the Partners Compliance  
> HelpLine at  
> [http://www.partners.org/complianceline](http://www.partners.org/complianceline) . If the e-mail was sent to you in  
> error  
> but does not contain patient information, please contact the sender and  
> properly  
> dispose of the e-mail.
> 
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> Mne\_analysis mailing listMne\_analysis at nmr.mgh.harvard.eduhttps://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne\_analysis
> 
> The information in this e-mail is intended only for the person to whom it is  
> addressed. If you believe this e-mail was sent to you in error and the e-mail  
> contains patient information, please contact the Partners Compliance HelpLine athttp://www.partners.org/complianceline . If the e-mail was sent to you in error  
> but does not contain patient information, please contact the sender and properly  
> dispose of the e-mail.
> 
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> Mne\_analysis mailing list  
> Mne\_analysis at nmr.mgh.harvard.edu  
> [https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne\_analysis](https://mail.nmr.mgh.harvard.edu/mailman/listinfo/mne_analysis)
> 
> The information in this e-mail is intended only for the person to whom it  
> is  
> addressed. If you believe this e-mail was sent to you in error and the  
> e-mail  
> contains patient information, please contact the Partners Compliance  
> HelpLine at  
> [http://www.partners.org/complianceline](http://www.partners.org/complianceline) . If the e-mail was sent to you in  
> error  
> but does not contain patient information, please contact the sender and  
> properly  
> dispose of the e-mail.

-------------- next part --------------  
An HTML attachment was scrubbed...  
URL: [http://mail.nmr.mgh.harvard.edu/pipermail/mne\_analysis/attachments/20171001/4d63161e/attachment-0001.html](http://mail.nmr.mgh.harvard.edu/pipermail/mne_analysis/attachments/20171001/4d63161e/attachment-0001.html)
